Showing posts with label MY NVT RESTO. Show all posts
Showing posts with label MY NVT RESTO. Show all posts

Saturday, 10 December 2011

NVT125: New Old Stock Preston Petty MX Front Mudguard

As mentioned in my first NVT post, the front mudguard is an American Preston Petty MX model. I trawled the web looking for NOS mudguards, and drew a blank until I read somewhere that Strictly Hodaka in the States had the original moulds from Preston Petty for the front mudguards.
I spoke to Paul, the gaffer, and he told me they had one left, with a tiny blemish, that I could have for a reduced price of $60.00. This was the last one off, made before the moulds broke! Timing is often everything in life!
Here is a pic of the existing one and the new one. It seems pretty clear they came out of the same mould, as there is a tiny 'casting error' blemish that is present on both guards. See red arrow.

So, I now have pretty much the complete set of key parts needed for the visuals of the bike, in this mudguard, the NOS petrol tank, the refurbished seat, and the NOS rear mudguard.

Tuesday, 6 December 2011

NVT125: Seat Back From Restorer

I haven't posted any 'before' pics, so, here's a set of 'before' and 'after' images:












Another excellent job by Andrew Leighton at RK Leighton. Although I may redo the rear bracket at some stage, with some filler paint, or similar, rust to lose the slight rust pits.

Saturday, 3 December 2011

Sunday, 20 November 2011

NVT125: eBay NOS Rear Mudguard

Recently found on Ebay, and bought for £21 is this NOS rear mudguard. This was a handy find, as my rear is not in good condition.

The eBay Ad stated: "New Old Stock Genuine BSA Tracker 125/175 rear mudguard in white. This will also fit the NVT Rambler 125/175. I got the last two from the factory in the 1990's" 

The black line is a pen line (that will rub off) and apparantly shows where the guard needs to be cut on some models.

Sunday, 6 November 2011

NVT125: Initial Check Over

Once I got the bike home, I loosely reassembled the bits the previous owner had removed, and took a good look over. It's generally in good restoreable condition. The only missing parts are the rear chrome rack, and the indicators. The indicators are Yamaha, so, should be relatively easy to find. Not sure about the rack though! I'll just have to wait.
The bike is an assortment of British, Italian, Japanese and American parts. It's surprising the ailing NVT bought it all together at all!
But, in my opinion, it's quite a good looking bike. It preceded the DT175 mono by some years, and was the first trail bike with a front disc brake. NVT (or BSA by that time), reverted back to drum brake on the later models. More on the contemporary history of NVT / BSA another day.
Back in one piece!
Tank is quite rusty on the outside, but I think it's salvageable. The engine is from a Yamaha AT2 (No AT2-1047x). The seat cover is original, but needs recovering. The RH side panel is perfect.
The exhaust is in suprisingly good condition, and should clean up OK. There is a rear mudguard mount broken on the frame, should be easy to fix. I'm not sure the rear light is standard. Both rims are rusty, so will need chrome plating.
This side of the seat cover has had a long thin patch professionally fitted in. At first glance, it looks standard, but in comparison to the other side, it's obviously a patch. The pet cock is seized solid. The inside of the tank is not too bad.
The Grimeca front brake, and the whole fork assembly is, I believe, from a Moto Morini 3.5. The caliper is seized, but should be salvageable. I'm assuming pads, and seals, etc, should be available from MM suppliers.










Apart from the master cylinder, I believe the rest is standard AT2 Yamaha, including the bars. So, the electrics should be reliable, unlike Italian wiring.
The petrol cap is Italian, and identical in design to my old Malagutti moped!
The American bit. I think, but may be wrong, that this "MX Preston Petty" is standard fitment? Or, it may be an 80's after market fitment, as many NVT's had a low tyre hugging front mudguard mounted on fork lugs, rather than under the headstock as this is. But, I think it suits the bike, so will probably keep it, or look for NOS / replica replacement.



NVT125: Purchase of NVT (Norton Villiers Triumph) from eBay

I've been fascinated with these since I had a DT175MX back in early 80's. So, when I saw this one, I had to have it, especially as it looked to be reasonably complete, if a little 'tired'.
The eBay ad said:
"1978/1979 NVT (Norton Villiers Triumph) 125cc Rambler for restoration project !!!

Excellent opportunity for those of you who love to restore old classic motorcycles.

I found this Rambler hidden away in my wifes grandparents shed where it had been since the late 80's.

It is completely original and has all the parts with it including the key.

It is a non runner of course and in need of FULL restoration, however it would make an amazing project for someone I am sure. I stripped the bike down to its major components as you can see from the photos, and was going to restore it myself back to its former glory, however my work commitments will not allow me the time to make a go of it.

Judging from the Km/h on the clock, I would say it was a Jap import at some point in the 80's, it still has its original British number plate which is 'V' reg and its last tax disc (Sept 1988).

There is no paperwork with it unfortunately as it was taken as it was found, however this is easily regainable once restoration is complete.[the old log book was found by the time I bought the bike]"
So, with 11,200 miles on it,the bike was mine for £462.00.
The accompanying eBay pics: